VVT conversion Wiring kit NA 1.6 Denso (OEM) Injectors
1.8 VVT Conversion Wiring Kit for your NA Mx-5 Miata
✈ Worldwide shipping
✉ Fast service, right to your door
➤ Mx-5 Miata Performance shop
This complete wiring kit converts your 1.6 NA engine wiring to a plug an play 1.8VVT wiring harness.
It adapts your injector wiring to a sequential injection harness, allows you to connect your VVT solenoid to your ECU, converts your CAS to a cam and crank position sensor and comes with adapters for your TPS and Idle control. For the fuel injectors you can either choose to go for the original Denso connectors or various Bosch connectors. This keeps you from using adapters.
Be aware that you need a standalone to use this conversion kit!
- 1x sequential injector wiring with VVT control.
- 1x wiring from ECU to engine harness
- 1x CAS adapter
- 1x TPS adapter
- 1x IAC adapter
This kit doesn't contain a ignition solution. NA>1.8VVT Coil on plug kits or a adapter harness for the stock VVT coilpacks are available on the webshop.
A standalone ecu is required to make this wiring harness fully functional.
Injector 3 and 4 are connected on the ecu's option ports, aswell as the VVT solenoid connector. The rest is all plug and play.
|breadcrumb||Engine Management Wiring harnesses|
|Verschil||NA 1.6 Denso (OEM) Injectors|
|type||NA 1.6 Denso (OEM) Injectors|
|material||PVC sleeved Wiring Harness|
VVT conversion Wiring kit NA 1.6 Denso (OEM) Injectors reviews
There are no reviews yet. You can be the first. Leave a review!